Events :
Workshops/Seminar/Roundtable :
December 27-29,2008
4th BSME - ASME International Conference on Thermal Engineering
Venue : REDC (LGED) Seminar Room, Level 12, LGED HQ, Agargaon, Dhaka, Bangladesh
Organized by
Bangladesh Society of Mechanical Engineers
In cooperation with
American Society of Mechanical Engineers
Co-sponsored by
Islamic University of Technology
(A Subsidiary Organ of OIC)
Proceedings:
4th BSME - ASME International Conference on Thermal Engineering
Editorial Board
Editor-in-Chief:
Prof A.K.M. Sadrul Islam
Dept of Mechanical and Chemical Engineering
Islamic University of Technology
Board Bazar, Gazipur-1704, Bangladesh
Email:
sadrul@iut-dhaka.edu, sadrul05@gmail.comEditors:
Prof. Toshiaki Setoguchi
Department of Mechanical Engineering
Saga University
Honjo Saga 840-8502 Japan
Email:
setoguci@me.saga-u.ac.jpProf. M. Ruhul Amin
Department of Mechanical & Industrial Engineering
Montana State University
Bozeman, MT 59715, USA
E-mail:
ramin@me.montana.eduDr. Sekhar Majumdar
Professor, Department of Mechanical Engineering,
Nitte Meenakshi Institute of Technology,
Bangalore 560 064, India
Former Head, CTFD Division NAL Bangalore 560 017, India
E-mail:
essem17@gmail.comDr. Firoz Alam
School of Aerospace, Mechanical and Manufacturing Engineering
RMIT University, Melbourne, Australia
E-mail:
firoz.alam@rmit.edu.auDr Mehrdad T. Manzari
School of Mechanical Engineering
Sharif University of Technology
Tehran, 11365-3567, Iran.
E-mail:
mtmanzari@sharif.edu
BSME-ASME JOINT CONFERENCE COMMITTEE
Conference Chairman: Prof. M. H. Khan,
Conference Co-Chairmen : Prof. M. Fazli Ilahi (BSME), Prof. M. K. Alam (ASME), Prof. Ramesh K Shah(ASME),
Conference Secretary: Prof. M. Imtiaz Hossain (BSME),
Chairman, Technical Committee: Prof. A.K.M. Sadrul Islam (BSME)
INTERNATIONAL ADVISORY COMMITTEE
Prof. Azhar Abdul Aziz (University Technology Malaysia)
Prof. Ruhul Amin (Montana State University, USA)
Prof. Faruk Arinc (Middle East Technical Univ., Turkey)
Prof. Ibrahim Dincer (Univ. of Ontario, Canada)
Prof. Rama Gorla (Cleveland State University, USA)
Prof. Carl H. Gibson (Univ. of Calif at San Diego, USA)
Dr. R.G.M. Hasan (Northumbria University, UK)
Prof. Ji-Huan He (Shanghai Donghua University, China)
Prof. Fazle Hussain (Univ. of Houston, USA)
Prof. Ahmed Faris Ismail (IIUM, Malaysia)
Prof. Jamil A. Khan (University of South Carolina, USA)
A/Prof. Masud Khan (Central Queensland Univ, Australia)
Prof. H.D. Kim (Andong National University, Korea)
Prof. M. Kiya (Kushiro National College of Tech, Japan)
Prof Kunio Kuwahara (Inst of Space & Astro. Sci, Japan)
Prof. Markku Lampinen (Helsinki Univ of Tech., Finland)
Prof. Hassan Mahfuz (Florida Atlantic University, USA)
Prof. Hamadiche Mahmoud (Leon University, France)
Dr. M.T. Manzari (Sharif University of Technology, Iran)
Dr. S. Majumdar (NAL, India)
Prof. Jim McGuirk (Loughborough Univ, UK)
Prof. R. Narasimha (NIAS, Bangalore, India)
Dr. J. A. Naser (Swinburn Univ of Technology, Australia)
Prof. Golam Newaz (Wayne State Univ., USA)
Prof. Toshiaki Setoguchi (Saga University, Japan)
Prof. P.K. Sen (IIT, Delhi, India)
Prof. Ali Sayigh (WREN, UK)
Prof. Muhammad Shahid (NUST, Pakistan)
Dr. M Ali Rob Sharif (University of Alabama,USA)
Prof. Ebrahim Shirani (Isfahan Univ of Technology, Iran)
Prof. Hyung Jin Sung (KAIST, Korea)
Prof. Mahmood Yaghoubi (Shiraz University, Iran)
Dr. K.B.Zaman (NASA Lewis Research Centre, USA)
List of Reviewers
Dr Gary Zimmer
Department of Mechanical Engineering,
Ballarat University, Ballarat, Australia
E-mail:
g.zimmer@ballarat.edu.au
Dr Angelo Tempia,
School of Aerospace, Mechanical and Manufacturing
Engineering,
RMIT University, Melbourne, Australia
E-mail:
angelo.tempia@rmit.edu.au
Dr Firoz Alam
School of Aerospace, Mechanical and Manufacturing
Engineering,
RMIT University, Melbourne, Australia
E-mail:
firoz.alam@rmit.edu.au
Dr Muhammad Hanif
Department of Mechanical Engineering,
Ballarat University, Ballarat, Australia
E-mail:
m.hanif@ballarat.edu.au
Dr Edsil Dilla
School of Aerospace, Mechanical and Manufacturing
Engineering,
RMIT University, Melbourne, Australia
E-mail:
edsil.dilla@rmit.edu.au
Prof Aliakbar Akbarzadeh
School of Aerospace, Mechanical and Manufacturing
Engineering,
RMIT University, Melbourne, Australia
E-mail:
aliakbar.akbarzadeh@rmit.edu.auMr Harun Chowdhury
School of Aerospace, Mechanical and Manufacturing
Engineering,
RMIT University, Melbourne, Australia
E-mail:
harun.chowdhury@rmit.edu.au
Prof. M. Ruhul Amin
Department of Mechanical & Industrial Engineering
Montana State University
Bozeman, MT 59715, USA
E-mail:
ramin@me.montana.edu
Prof. S. Majumdar
NMIT Bangalore, India
Prof. M.D.Deshpande
MSRSAS Bangalore, India
Prof. J.H.Arakeri
IISc Bangalore, India
Prof. GSVL Narasimhan
IISc Bangalore, India
Prof. R.V.Ravikrishna
IISc Bangalore, India
Engr. Md. Ahiduzzaman
Senior Scientific Officer
Farm Machinery & Postharvest Technology
Bangladesh Rice Research Institute
Gazipur-1701, Bangladesh
Email:
ahid72@yahoo.com
Prof. S. Matsuo
Dept. of Mechanical Engineering
Saga Univertsity, Japan
matsuo@me.saga-u.ac.jp
Dr. S Momoki
Dept. of Mechanical Systems Engineering
Nagasaki University, Japan
momoki@nagasaki.ac.jp
Prof. T. Nosoko
Dept. of Mechanical Systems Engineering
University of Ryukyus, Japan
yongrang@tec.u-ryukyu.ac.jp
Prof. M. Yaga
Dept. of Mechanical Systems Engineering
University of Ryukyus, Japan
yaga@tec.u-ryukyu.ac.jp
Prof. Y. Miyazato
Dept. of Mechanical Systems Engineering
The University of Kitakyusyu, Japan
miyazato@env.kitakyu-u.ac.jp
Dr. Md. Quamrul Islam
Professor
Dept. of ME
BUET, Dhaka, Bangladesh
quamrul@me.buet.ac.bd
Dr. Chowdhury Md. Feroz
Professor
Dept. of ME
BUET, Dhaka, Bangladesh
cmferoz@me.buet.ac.bd
Dr. Mohammad Ali
Professor
Dept. of ME
BUET, Dhaka, Bangladesh
mali@me.buet.ac.bd
Dr. S. Reaz Ahmed
Professor
Dept. of ME
BUET, Dhaka, Bangladesh
Dr. Md. Mahbubur Razzaque
Associate Professor
Dept. of ME
BUET, Dhaka, Bangladesh
mmrazzaque@me.buet.ac.bd
Dr. Arif Hasan Mamun
Associate Professor
Dept. of ME
BUET, Dhaka, Bangladesh
arifhasan@me.buet.ac.bd
Dr. Aloke Kumar Mozumder
Associate Professor
Dept. of ME
BUET, Dhaka, Bangladesh
aloke@me.buet.ac.bd
Dr. Md. Mamun
Associate Professor
Dept. of ME
BUET, Dhaka, Bangladesh
mdmamun@me.buet.ac.bd
Dr. Md. Moniruzzaman
AssociateProfessor
Dept. of MME
BUET, Dhaka, Bangladesh
mmoniruzzaman@me.buet.ac.bd
Dr. Md. Shahjada Tarafder
Associate Professor
Dept. of NAME
BUET, Dhaka, Bangladesh
mst40@hotmail.com
Dr. Md Abdul Alim
Associate Professor
Dept. of Mathematics
BUET, Dhaka, Bangladesh
maalim@math.buet.ac.bd
Dr. Abdullahil Azeem
Asstt. Professor
Dept. of IPE
BUET, Dhaka, Bangladesh
azeem@ipe.buet.ac.bd
AUTHOR’S INDEX
A . Emarati
YMA College, P. O. Box 19395-6618,
Tehran,
Iran.
E-mail:
ahmademarati@hotmail.com
Paper-029
Alamgir Hossain
Assistant Professor, ME Dept.,
Military Institute of Science and Technology,
Dhaka,
Bangladesh.
E-mail: ahossain@mist.edu.bd
Paper-26
A. Haque
Department of Aerospace Engineering and
Mechanics
The University of Alabama, Tuscaloosa, AL 35487,
USA.
E-mail: ahaque@eng.ua.edu
Paper-098
Akio Miyara
Department of Mechanical Engineering, Saga
University, 1 Honjomachi, Saga-Shi, 849-8502,
Japan.
E-mail: miyara@me.saga-u.ac.jp
Keynote-Paper-02
Arafat A. Bhuiyan
Department of Mechanical and Chemical
Engineering, IUT,
Board Bazar, Gazipur-1704,
Dhaka,
Bangladesh.
E-mail:
arafat_iut_mce@yahoo.com
Paper-146
A.N. M. Mominul Islam Mukut
Department of Mechanical Engineering,
Dhaka University of Engineering and Technology,
Gazipur-1700,
Bangladesh.
E-mail:
mukut_bogra@yahoo.com
Paper-037
A.K.M. Abdul Hamid
Mechanical Engineering Department, RUET,
Rajshahi-6204,
Bangladesh.
E-mail: mahamid_ruet@yahoo.com
Paper-151
Anisur Rahman
Thermal Optics Laboratory, Department of
Mechanical Engineering
Polytechnic Institute of NYU,
6 MetroTech Center, Brooklyn, NY 11201,
USA.
Paper-047
Altab Hossain
Department of Mechanical Engineering,
Faculty of Engineering,
University Industry Selangor,
International Islamic University Malaysia,
Malaysia.
Paper-097, 103
A. K. Das
Department of Mechanical Engineering,
Indian Institute of Technology, Kharagpur- 721302,
India.
E-mail: arup@mech.iitkgp.ernet.in
Paper-072, 112
A. Rahman
Department of Natural Science,
Stamford University Bangladesh, Dhaka,
Bangladesh.
E-mail:
azadrahman@gmail.com
Paper-048
Ahmed Imtiaz Uddin
Department of Mechanical Engineering,
Bangladesh University of Engineering and
Technology,
Dhaka-1000,
Bangladesh.
E-mail: aimtiaz_me@yahoo.com
Paper-086
A.B.M. T. Hasan
Graduate School of Science and Engineering, Saga
University,
1 Honjo, Saga 840-8502,
Japan.
E-mail:
mdmamun@me.buet.ac.bd
Paper-009
A. M. Afsar
Department of Mechanical Engineering, Changwon
National University,
Changwon, 641-773
South Korea.
E-mail:
mdafsarali1967@yahoo.com977
Paper-121
A.Motin
Department of Mechanical Engineering
Bangladesh University of Engineering and
Technology (BUET),
Dhaka-1000,
Bangladesh.
E-mail:
motinme@gmail.com
Paper-075, 071
A.K. M. Mohiuddin
Department of Mechanical Engineering,
International Islamic University,
Malaysia.
E-mail:
mohiuddin@iiu.edu.my
Paper-097, 129, 103
A.M.M.Mukaddes
Department of Industrial and Production
Engineering,
Shahjalal University of Science and Technology,
Sylhet,
Bangladesh.
Paper-050
B. B. Ghosh
IEM Salt Lake, Kolkata and Research Consultant,
IIT Kharagpur,
India.
E-mail:
bankimghosh@hotmail.com
Paper-031, 035, 044
Behrooz Hemmati
Department of Mechanical Engineering,
Islamic Azad University, Shahr-e-Rey Branch,
Tehran,
Iran.
E-mail: b_hemmati@mecheng.iust.ac.ir
Paper-082
C. M. Feroz
Department of Mechanical Engineering, BUET,
Dhaka,
Bangladesh.
E-mail:
cmferoz@me.buet,ac.bd
Paper-090, 132
F. Farhani
Iranian Research Organization for Science and
Technology (I.R.O.S.T.),
P.O. Box 15815 – 3538, Tehran,
Iran.
E-mail:
ffarhani@yahoo.com
Paper-070, 084.
Firoz Alam
School of Aerospace, Mechanical and Manufacturing
Engineering
RMIT University, Melbourne
Australia.
E-mail:
firoz.alam@rmit.edu.au
Paper-AU-01, AU-07, AU-08, AU-09.
F. M. Kamal
Atomic Energy Centre, Ramna,
Dhaka-1000
Bangladesh
E-mail:
kamal_ndt@yahoo.com
Paper-041
G.Chella Rao
Research Fellow, Satyam computers services Ltd,
Hyderabad,
India.
E-mail:
chellarao@yahoo.com
Paper-148
Golam M. Newaz
Department of Mechanical Engg.,
Wayne State University,
5050 Anthony Wayne Drive,
Detroit, Michigan 48201,
USA.
E-mail:
gnewaz@eng.wayne.edu
Keynote-Paper-03
H. Mahfuz
Department of Ocean Engineering,
Florida Atlantic University, Boca Raton, FL33431,
USA.
E-mail: hmahfzu@fau.edu
Keynote-Paper-05
Hasan M.M. Afroz
Department of Mechanical Engineering,
Dhaka University of Engineering & Technology,
Gazipur-1700,
Bangladesh.
E-mail:
hafroz@yahoo.com
Paper-TS-02
Harun Chowdhury
School of Aerospace, Mechanical and Manufacturing
Engineering,
RMIT University, Melbourne,
Australia.
E-mail:
harun.chowdhury@rmit.edu.au
Paper-AU-04, AU-05, AU-06
I. K. Islam
Department of Mathematics,
978University of Dhaka, Dhaka -1000,
Bangladesh.
E-mail:
ifteki@hotmail.comPaper-008
I. Sultana
Department of Industrial & Production Engineering
Bangladesh University of Engineering & Technology
(BUET)
Dhaka,
Bangladesh.
E-mail:
nrdhar@ipe.buet.ac.bd
Paper-105
Islam M. Rafiqul
Faculty of Mechanical Engineering
University Technology Malaysia
Johor,
Malaysia.
E-mail:
rafiqulis@fkm.utm.my
Paper-073
Jaegwi Go
School of Mechatronics
Changwon National University
#9 Sarim-dong, Chagnwon
641-773, GeyoungNam,
South Korea.
E-mail:
jggo@changwon.ac.kr
Paper-123
Jaykumar D.Golhar
Department of Mechanical Engineering,
Government Polytechnic Sakoli, Dist. Bhandara,
Maharashtra- 441802,
India.
E-mail:
jaykumar_golhar@rediffmail.com
Paper-080
K. C. A. Alam
Department of ECE, East-West University,
43 Mohakhali C/A,
Dhaka 1212,
Bangladesh.
E-mail: kcaalam@ewubd.edu
Paper-125
K.M. Shorowordi
Institute of Appropriate Technology,
Bangladesh University of Engineering and
Technology (BUET),
Dhaka 1000,
Bangladesh.
E-mail:
kmshorowordi@iat.buet.ac.bd
Paper-131
K.P. Kumar
Dept. of Mechanical Engineering,
Vignan’s Engineering College, Vadlamudi,
Guntur –522 213,
India.
E-mail:
murvmk@yahoo.com
Paper-143
Lijo Vincent
School of Mechanical Engineering, Andong National
University,
Andong, 760-749,
South Korea.
E-mail:
lijovincent@rediffmail.com
Paper-TS-05
M. Ferdows
Department of Mathematics,
University of Dhaka, Dhaka -1000,
Bangladesh.
E-mail:
ifteki@hotmail.com
Paper-008
Muhammad M. Rahman
Department of Mechanical Engineering,
University of South Florida, Tampa, Florida 33620,
USA.
E-mail:
rahman@eng.usf.edu
Keynote paper-01
Md. Hasanuzzaman
Department of Mechanical Engineering,
University of Malaya, 50603 Kuala Lumpur,
Malaysia.
E-mail:
hasan492@yahoo.com
Paper-002
M. Ruhul Amin
Department of Mechanical and Industrial
Engineering,
Montana State University,
Bozeman, MT 59717,
USA.
E-mail:
ramin@me.montana.edu
Paper-141
Masoud Sistaninia
Department of Mechanical Engineering
Iran University of Science and Technology, Tehran,
Iran.
E-mail:
m_sistani@mechEng.iust.ac.ir
Paper-AU-10
Mohammad Mashud
Department of Mechanical Engineering,
979
Khulna University of Engineering & Technology
(KUET), Khulna-9203,
Bangladesh.
E-mail:
mdmashud@yahoo.com
Paper-043, 057, 058
Mehran Shahryari
Iranian Space Agency, Tehran, Iran.
Iranian Research Organization for Science and
Technology (I.R.O.S.T),
P.O. Box 15815 – 3538, Tehran,
Iran.
E-mail: a_mshahryari@yahoo.com
Paper-083
M. G. Rasul
College of Engineering and Built Environment
Faculty of Sciences, Engineering and Health
Central Queensland University,
Rockhampton, QLD 4702,
Australia.
Paper-AU-02, AU-03, AU-11
M. A. Alim
Department of Mathematics,
Bangladesh University of Engineering and
Technology,
Dhaka-1000,
Bangladesh.
E-mail: maalim@math.buet.ac.bd
Paper-093
Md. M. Rahman
Department of Mathematics,
Bangladesh University of Engineering and
Technology, Dhaka-1000,
Bangladesh.
E-mail: mmustafizurrahman@math.buet.ac.bd
Paper-104
Md. Mamun
Department of Mechanical Engineering,
Bangladesh University of Engineering & Technology,
Dhaka-1000,
Bangladesh.
E-mail: mamun@me.buet.ac.bd
Paper-009, 010
M. S. Khan
Department of Mechanical Engineering,
Chittagong University of Engineering & Technology
(CUET), Chittagong,
Bangladesh.
E-mail:
sharif_khan5827@yahoo.com
Paper-115
Md. Mahbubul Alam
Department of Mechanical Engineering,
Chittagong University of Engineering and
Technology, Chittagong-4349,
Bangladesh.
E-mail:
malam@cuet.ac.bd
Paper-081
Md. S. Tarafder
Department of Naval Architecture and Marine
Engineering,
Bangladesh University of Engineering and
Technology, Dhaka-1000,
Bangladesh.
E-mail:
shahjada68@yahoo.com
Paper-089
Md. R. Islam
Mathematics Discipline, Khulna University,
Khulna-9208,
Bangladesh.
E-mail: alam_mahmud2000@yahoo.com , mri_sn@yahoo.com
Paper-003
Md. Ashraful Islam
Department of Mechanical Engineering,
BUET, Dhaka,
Bangladesh
E-mail:
aislam@me.buet.ac.bd
Paper -005
M.P. Abdul Ghan,
Faculty of Mechanical Engineering
University Technology Malaysia (UTM), Skudai,
Johor,
Malaysia.
E-mail: pauzi@fkm.utm.my
Paper-130
M. M. A. Sarker
Department of Mathematics,
Bangladesh University of Engineering and
Technology, Dhaka-100,
Bangladesh.
E-mail: masarker@math.buet.ac.bd
Paper-095
Md. Sarwar Alam
Institute of Natural Science, United International
University, Dhaka-1000
,Bangladesh.
E-mail:
csemdsarwar@yahoo.com
Paper-022
980
M. M. Rahman
Faculty of Mechanical Engineering, Universiti
Malaysia Pahang
Tun Abdul Razak Highway, 26300,
Gambang, Kuantan, Pahang,
Malaysia.
E-mail: mustafizur@ump.edu.my
Paper-016
Md. Mahbub Alam
Department of Mechanical Engineering,
The Hong Kong Polytechnic University,
Hung Hom, Kowloon,
Hong Kong.
E-mails: mmalam@polyu.edu.hk
Paper-036
Md. Iqbal Mahmud
Division of Mechanical and Automotive Engineering,
Kongju National University, 275 Boodae-dong,
Cheonan,
Chungnam 330-717,
South Korea.
E-mail:
mimchanchal@yahoo.com
Paper-051
M. Delowar Hossain
Department of Mathematics,
Chittagong University of Engineering & Technology,
Chittagong,
Bangladesh.
E-mail:
alam_mahmud2000@yahoo.com
Paper-074
M. A. Islam
Department of Mechanical Engineering
Khulna University of Engineering & Technology,
Khulna-920300,
Bangladesh.
E-mail:
arifbitk@yahoo.com
Paper-TS-03
M.M. Alam
Mathematics Discipline, Khulna University,
Khulna-9208,
Bangladesh.
E-mail:
alam_mahmud2000@yahoo.com
Paper-018
M. A. Masud
Mathematics Discipline, Khulna University,
Khulna-9208,
Bangladesh.
E-mail: alam_mahmud2000@yahoo.com
Paper-019
Mohammad Nasim Hasan
Assistant Professor, Department of Mechanical
Engineering, BUET, Dhaka-1000,
Bangladesh.
E-mail:
nasim@me.buet.ac.bd
Paper-113, 114
Mehran Shahryari
Iranian Space Agency, Tehran, Iran.
Iranian Research Organization for Science and
Technology (I.R.O.S.T),
P.O. Box 15815 – 3538, Tehran,
Iran.
E-mail:
a_mshahryari@yahoo.com
Paper-067
Md. Tofajjal Hossain Chowdhury
Division of Mechanical and Automotive Engineering,
College of Engineering, Kongju National University,
275 Boodae-Dong, Cheonan, Chungnam-do,
South Korea.
E-mail:
rashed9837@yahoo.com
Paper-028
Mohammad Mainuddin
Department of Mechanical Engineering
Bangladesh University of Engineering &
Technology (BUET), Dhaka-1000,
Bangladesh.
E-mail: mainuddin@me.buet.ac.bd
Paper-045
M. Ali
Department of Mechanical Engineering,
BUET, Dhaka,
Bangladesh
E-mail:
mali@me.buet.ac.bd
Paper-137, 138, 144
M. A. Gafur
Dept. of Physics, BUET, Dhaka-1000,
Bangladesh.
Paper-134, 147
Muhammad Sohail
Department of Materials and Metallurgical
Engineering,
N.E.D. University of Engineering and Technology,
Karachi-75270,
Pakistan.
E-mail: msohailhanif@yahoo.com
Paper-085,
981M.A.R. Sharif
Aerospace Engineering and Mechanics Department,
The University of Alabama
Tuscaloosa, Alabama 35487-0280,
U.S.A.
E-mail:
msharif@eng.ua.edu
Paper-021
M. Khairul Alam
Department of Mechanical Engineering, Ohio
University,
Athens, OH 45701,
USA.
E-mail:
alam@ohio.edu
Paper-118
Md. Shazib Uddin
Department of Mechanical Engineering
Rajshahi University of Engineering and Technology,
Rajshahi-6204,
Bangladesh.
E-mail: shazib0397@gmail.com
Paper-030
M. A. Islam
Lecturer,
Department of Industrial & Production Engineering
Rajshahi University of Engineering & Technology
(RUET),
Rajshahi,
Bangladesh.
E-mail:
maislam252@yahoo.com
Paper-102
Mohammad Shiddiqur Rahman
Dept. of Mechanical and Precision Engineering,
Gyeongsang National University,
South Korea.
E-mail: m_sq_rahman@yahoo.com
Paper-091
M. M. Rahman
Department of Mechanical Engineering
Bangladesh University of Engineering and
Technology,
Dhaka 1000,
Bangladesh.
E-mail: muzib1061@yahoo.com, reaz207@yahoo.com
Paper-116
Md. M. Rahman
Rural Power Company Ltd (RPCL)
House # 25, Road # 18, Sector # 3
Uttara Model Town, Dhaka,
Bangladesh.
E-mail: m92504@yahoo.com
Paper-120
Md. N. Nabi
Department of Energy Process and Engineering,
Norwegian University of Engineering and
Technology,
Trondheim-7491,
Norway,
E-MAIL: nurun.nabi@ntnu.no
Paper-094
M.R. I. Sarker
Department of Mechanical Engineering,
RUET, Rajshahi,
Bangladesh.
E-mail:
islamrabiul@yahoo.com
Paper-152
M. M. Rahman
Department of Mechanical Engineering, CUET,
Chittagong-4349,
Bangladesh
E-mail: mmrahman@cuet.ac.bd
Paper-049, 055
M. Ahiduzzaman
Farm Machinery & Postharvest Technology Division,
Bangladesh Rice Research Institute,
Gazipur-1701,
Bangladesh.
E-mail:
ahid72@yahoo.com
Paper-119
Mohammad Nurul Islam
Department of Mechanical Engineering,
Faculty of Mechanical Engineering,
Rajshahi University of Engineering & Technology,
Rajshahi-6204,
Bangladesh.
E-mail:
mnislam60@yahoo.com
Paper-042
M.A. Islam
Materials and Metallurgical Engineering Department
BUET, Dhaka-1000,
Bangladesh.
E-mail: aminulislam@mme.buet.ac.bd
Paper-011
Md. Anayet U Patwari
Department of Manufacturing and Materials
Engineering,
International Islamic University Malaysia,
Malaysia.
E-mail:
aupatwari@hotmail.com982
Paper-023
Md. M. Alam
Department of Mechanical Engineering,
Chittagong University of Engineering and
Technology,
Chittagong-4349
Bangladesh.
E-mail:
malam@cuet.ac.bd
Paper-108
Manosh C. Paul
Department of Mechanical Engineering,
University of Glasgow, Glasgow G12 8QQ,
UK.
E-mail: m.paul@mech.gla.ac.uk
Paper-032
M. M. Rahman
Helsinki University of Technology, Department of
Applied Mechanics,
S¨ hk¨ miehentie 4, FIN-02015 HUTao,
Finland.
E-mail: Mizanur.Rahman@tkk.fi
Paper-124
M. Rafiqul Hoque
Institute of Information and Communication
Technology
Bangladesh University of Engineering and
Technology (BUET)
Dhaka 1000,
Bangladesh.
E-mail: rafiqul@iict.buet.ac.bd
Paper-139
M. L. Rahaman
Department of Mechanical Engineering
Dhaka University of Engineering and Technology,
Gazipur, Gazipur-1700,
Bangladesh.
E-mail: dewan052005@yahoo.com, lutfar57@yahoo.com
Paper-034, 053
N.A.Ahmed
Associate Professor, Aerospace Engineering,
School of Mechanical and Manufacturing
Engineering,
University of New South Wales, Australia, NSW
2052,
Australia.
E-mail:
n.ahmed@unsw.edu.au
Paper-006
Niema Afroze
Graduate Student
Department of Civil Engineering,
Bangladesh University of Engineering and
Technology (BUET),
Dhaka-1000.
E-mail:
nafroze@gmail.com
Paper-040
Noman Hasan
Department of Mechanical Engineering,
Bangladesh University of Engineering and
Technology,
Dhaka-1000,
Bangladesh.
E-mail:
noman.becker@yahoo.com
Paper-117
Nirendra N. Mustafi
Department of Mechanical Engineering,
Rajshahi University of Engineering and Technology,
Rajshahi-6204,
Bangladesh.
E-mail:
nnmustafi@gmail.com
Paper-004
Nasrin Akhter
Department of Mechanical Engineering
Iwate University, 4-3-5, Ueda, Morioka,
Iwate 020-8551,
Japan.
E-mail:
nasrin6092002@yahoo.com
Paper-033
Kader Md. Faisal
Department of Mechanical Engineering,
Kongju National University, 275 Boodae-Dong,
Cheonan 330-717,
Republic of Korea.
E-mail:
mfaisaliut@yahoo.com
Paper-063
K.S. Niaki,
Iranian Research Organization for Science and
Technology (I.R.O.S.T),
P.O. Box 15815 – 3538,
Tehran,
Iran.
E-mail: ffarhani@yahoo.com
Paper-069
L. K. Saha
Laboratory of Space Physical Fluid Dynamics,
Division of Mechanical and Space Engineering,
Graduate School of Engineering, Hokkaido
University,
Kita-13, Nishi-8, Kita-Ku, Sapporo, 060-8628,
983
Japan.
E-mail: saha@mech-me.eng.hokudai.ac.jp
Paper-046
Pilhwan Kim
Department of Mechanical and Precision
Engineering,
Gyeongsang National University, Tongyeong, 650-
160,
South Korea.
E-mail:
pilani@naver.com
Paper-088
Prabir Kumar Bhattacharjee
Mathematics Discipline, Khulna University,
Khulna-9208,
Bangladesh.
Paper-061
P. C. Roy
Department of Mechanical Engineering,
National Institute of Technology Silchar,
Silchar, Assam,
India.
E-mail:prokash@nits.ac.in, prokash.roy@gmail.com
Paper-078, 079
Q.H. Nagpurwala
Centre for Rotating Machinery Design,
Department of Mechanical and Automotive
Engineering,
M. S. Ramaiah School of Advanced Studies,
Bangalore 560054,
India.
E-mail: nagpurwala@msrsas.org
Paper-059
R.A. Hossain
Lecturer, Primeasia University, Dhaka-1213
Bangladesh.
E-mail:
rifat79_me@yahoo.com
Paper-111
Rabindra Nath Mondal
Mathematics Discipline; Science,
Engineering and Technology School, Khulna
University,
Khulna-9208,
Bangladesh.
E-mail:
rnmondal71@yahoo.com
Paper-014
Rifat Ara Rouf
School of Engineering and Computer science,
Independent University, Dhaka-1000,
Bangladesh.
E-mail:
rifatar@secs.iub.edu.bd
Paper-101
Shama Farabi Barna
Department of Mechanical and Chemical
Engineering, IUT,
Board Bazar, Gazipur-1704,
Dhaka,
Bangladesh.
E-mail:
farabibd@gmail.com,
Paper-140, 145
Sumon Saha
Department of Energy and Environmental
Engineering,
Interdisciplinary Graduate School of Engineering
Sciences,
Kyushu University, 6-1 Kasuga-koen, Kasuga-shi,
Fukuoka 816-8580,
Japan.
E-mail:
sumon@phase.cm.kyushu-u.ac.jp
Paper-149, 150
Salah Uddin Ahmed Hamim
Department of Mechanical Engineering, BUET
Dhaka – 1000,
Bangladesh.
E-mail: hamim.buet@gmail.com
Paper-133
S. M. Humayun Kabir
School of Mechanical and Automotive Engg.,
University of Ulsan.
P.O Box18 Ulsan 680-749,
Republic of Korea.
E-mail : humayun@mail.ulsan.ac.kr
Paper-038
Suman Ghosh
Department of Mechanical Engineering,
Indian Institute of Technology,
Kharagpur-721302,
India.
E-mail: sumanghosh@mech.iitkgp.ernet.in
Paper-060
Souman Rudra
Division of Energy Systems Research,
Graduate School, Ajou University,
Suwon 443-749,
South Korea.
984
E-mail: soumanrudra@yahoo.com, souman@ajou.ac.kr
Paper-062, 107
S. M. Mahfuzur Rahman
Department of Mechanical Engineering, CUET,
Bangladesh.
E-mail:
smmrahman@cuet.ac.bd
Paper-015
S.N. Sridhara
Head of Mech. and AE Dept,
Automotive Engineering Centre,
M. S. Ramaiah School of Advanced Studies,
Bangalore,
India.
E-mail: sns@msrsas.org, sridharasn1964@gmail.com
Paper-077
Saiful Bari
Sustainable Energy Centre,
School of Advanced Manufacturing and Mechanical
Engineering,
University of South Australia, SA 5095,
Australia.
E-mail:
saiful.bari@unisa.edu.au
Paper-099
Suryakant Nagdewe
School of Mechanical Engineering, Andong National
University,
388 Songchun-dong, Andong Gyeonbuk 760-749
South Korea.
E-mail: surya@anuis.andong.ac.kr
Paper-TS-04
Sekhar Majumdar
Professor, Department of Mechanical Engineering,
Nitte Meenakshi Institute of Technology,
Bangalore 560 064, India and former Head,
CTFD Division NAL Bangalore 560 017,
India.
E-mail:
essem17@gmail.com
Keynote-Paper-04
T. Sultana
Institute of Natural Science,
United International University (UIU), Dhaka-1209
Bangladesh.
E-mail:
labsachin@gmail.com
Paper-027
Waseem Amjad
Combustion Engineering Lab., Mechanical
Department,
Myong-Ji University,
Paper Presented on following topic ;
HEAT TRANSFER
LAMINAR AND TURBULENT FLOW
HEAT & MASS TRANSFER
|
|
288 | ||
| Paper-048 |
NATURAL CONVECTION FLOW ALONG THE WAVY CONE IN CASE OF
UNIFORM SURFACE HEAT FLUX WITH TEMPERATURE DEPENDENT
VISCOSITY
A. Rahman, M. M. A. Sarker, N.E. Mostafa, M. M. Molla (Bangladesh). |
294 | |
| Paper-051 |
CONTROL OF WATER HEAT RECOVERY CHILLER USING SPLIT CONDENSER
HEAT RECOVERY CHILLER SYSTEM
Md. I. Mahmud, H. M. Cho and M. Iqbal. (South Korea). |
300 | |
| Paper-074 |
VISCOUS DISSIPATION AND JOULE HEATING EFFECTS ON STEADY MHD
COMBINED HEAT AND MASS TRANSFER FLOW THROUGH A POROUS MEDIUM
IN A ROTATING SYSTEM
Md. M. Alam, M. D. Hossain, M. A. Hossain and Md. Ferdows (Bangladesh). |
306 | |
| TS-03 |
EFFECTS OF FORCED WAVE AND SURFACTANT ON STEAM ABSORPTION IN
FALLING FILM OF AQUEOUS LIBR SOLUTION
Md A. Islam, A. Miyara, T. Setoguchi.(Japan). |
BOUNDARY LAYER AND FREE SURFACE FLOWS
INDUSTRIAL FLUID MECHANICS
COMBUSTION & REACTING FLOWS
| Paper-016 |
EFFECT OF ENGINE SPEED ON PERFORMANCE OF FOUR-CYLINDER DI
HYDROGEN FUELED ENGINE
M. M. Rahman, Md. K. Mohammed and R. A. Bakar. (Malaysia). |
500 | |
| Paper-136 |
THE EFFECT OF COMBUSTION AIR DISTRIBUTION ON COMBUSTION
CHARACTERISTICS IN REGENERATIVE COMBUSTION SYSTEM
W. Amjad, I. Hussain and In-Lim Gweon. (South Korea). |
506 | |
| AU-02 |
COMPARISON OF THE PERFORMANCE AND EMISSIONS OF A PETROL
ENGINE USING A RANGE OF UNLEADED FUELS
S. A. Breffit, M.G. Rasul and A. A. Chowdhury. (Australia). |
512 | |
| Paper-004 |
A STUDY OF THE EMISSIONS FROM A DUAL FUEL ENGINE N.N. Mustafi and R. R. Raine. (Bangladesh). |
520 | |
| Paper-078 |
FINITE-TIME THERMODYNAMIC MODELLING AND SIMULATION OF
IRREVERSIBLE DIESEL CYCLE ENGINES P. C. Roy. (India). |
529 | |
| Paper-035 |
STUDIES ON THE NOISE LEVEL AND PERFORMANCE OF A TWO CYLINDER
DIESEL ENGINE USING MODIFIED MUFFLER.
B. B Ghosh, R. Panua, P. Bhattacharya, P. K. Bose, S. Chakraborty. (India). |
NUMERICAL METHODS
THERMAL FLUIDS MACHINERY
|
NUMERICAL STUDY OF TURBULENT SLOT-JET IMPINGEMENT HEAT TRANSFER
FROM CONCAVE CYLINDRICAL SURFACES M.A.R. Sharif and K.K. Mothe. (USA). |
677 | ||
| Paper-151 |
CHARACTERISTICS OF TIME MEAN VELOCITY AND TEMPERATURE FIELDS
FOR A FULLY DEVELOPED TURBULENT FLOW IN AN ASYMMETRICALLY
HEATED SQUARE DUCT WITH RIBBED ROUGH BOTTOM WALL
A.K.M. A. Hamid, M.A. T. Ali and A. R. Akhanda. (Bangladesh). |
683 | |
| Paper-062 |
EXERGETIC ANALYSIS OF COAL FIRED THERMAL POWER PLANTS BASED
ADVANCE STEAM PARAMETERS
S. Rudra, H. M. Shim and H. T. Kim. (South Korea). |
695 | |
| Paper-118 |
PORE LEVEL MODELING OF CONVECTION IN A SILICON CARBIDE
FOAM
M. K. Alam, M. S. Anghelescu and M. Wright. (USA) |
702 |
RENEWABLE ENERGY AND ENERGY EFFICIENCY
ENVIRONMENT
| Paper-049 |
NOX REDUCTION IN A HYBRID PLANT: BOILER SIMULATION FOR
REBURNING
M. M. Rahman, R. Saha, A.K.M. S. Islam. (Bangladesh). |
766 | |
| Paper-040 |
APPLICATION OF GIS FOR MONITORING IMPACT OF ARSENIC
AWARENESS INITIATIVES ON HUMAN HEALTH IN THE WORST AFFECTED
AREAS OF DHAKA DIVISION
N. Afroze and Md. M. Rahman. (Bangladesh). |
772 | |
| Paper-055 |
IMPACT OF TRACE METAL ON ENVIRONMENT FROM LANDFILL MSW: A
CASE STUDY IN DHAKA CITY
M. M. Rahman, T. A. Aziz, R. Saha. (Bangladesh). |
778 | |
| Paper--099 |
STUDIES OF AIRFLOW AND POLLUTION LEVEL IN LONGITUDINAL ROAD
TUNNEL DURING TRAFFIC JAM CONDITIONS
S. Bari and J. Naser. (Australia). |
784 | |
| Paper-119 |
ENERGY UTILIZATION AND ENVIRONMENTAL ASPECTS OF RICE
PROCESSING INDUSTRIES IN BANGLADESH
M. Ahiduzzaman and A.K.M S. Islam. (Bangladesh). |
790 | |
| Paper-042 |
A COMPARATIVE STUDY ON THE FIXED BED PYROLYSIS OF DIFFERENT
BIOMASS SOLID WASTES
Md. N. Islam, M.Rahman and S.M. N. Hoque. (Bangladesh). |
THERMAL BEHAVIOR OF MATERIALS PROCESSING
RELATED TOPICS
[ REEIN still to cover all past renewable
energy related events. In this regard, please provide us
your detailed events
with photos. REEIN will post all inforamtion. Please mail at :
reein@dhaka.net
,
myreein@yahoo.com , reeinorg@hotmail.com , reeinorg@gmail.com ]
